en
Select category
Buenos Aires

Machine for repair of ball joints and steering tips SJR 3

machine for repair of ball joints and steering tips SJR 3
1 / 4
machine for repair of ball joints and steering tips SJR 3 - photo 1 machine for repair of ball joints and steering tips SJR 3 - photo 2 machine for repair of ball joints and steering tips SJR 3 - photo 3 machine for repair of ball joints and steering tips SJR 3 - photo 4
Renewed: 20 May 2020, 09:04 ID: 676
$1,380/piece2
Flagma member since 12 March 2018
Стил Александр
менеджер

Description

SJR 3 machine for repair of ball joints and steering tips is a guaranteed source of profit for your car service. With it, you can quickly and efficiently restore the suspension, steering device. The device has integrated furnace, and centering mechanism. This allows one operator to cope with repair steering tip.

When is a steering tip repair required?
Ball joints and steering tips wear out. As a result, the polymer insert located inside is erased. In its place a void forms. The reason for this are:

Excessive loads;
Penetration of dirt;
Movement on roads in poor condition.

The principle of using SJR technologySJR 3 machine
The molten polymer is fed into the interior into the cavity between the ball and the sleeve body through a drilled hole under pressure.
As it freezes, it forms a new, ideal in technical parameters, seal for the lever finger.
The restored unit is able to serve from 15,000 to 25,000 km, depending on the condition of the roads on which the car will ride;
In the event of the effects of new wear, repeated restoration of the ball joints is allowed.
After restoring ball joints and steering tips using SJR technology, car owners note a decrease in lubricant consumption

Advantages of the SJR 3
Automated lever clamp;
Innovative centering mechanism. Thanks to him, the master can cope with the repair of the part without outside help;
Integrated polymer melting system. A gas burner is needed only to extract the remnants of the old polymer from the detail. The new portion of fluoroplastic will be warmed up to the required temperature by the machine itself;
High piston pressure.

Package bundle
Extruder;
Control block;
Thermal sensor;
Bushings for centering the ball joints: 10 pcs.;
Washers for centering the ball joints: 5 pcs.;
Power cable;
Pneumatic equipment;
Pressure regulator;
Replaceable nozzles: 3 pcs .;
Fastening mechanism;
Centering mechanism;
Consumables polymer: 20 pcs .;
Gas-burner.

The owner of the ad has the most up-to-date information.
,  Kharkiv, UA
Flagma member since 12 March 2018
Still looking for:

Similar ads

10
Charcoal-burning machine/Charcoal production
Charcoal-burning machine/Charcoal production
Charcoal-burning machine/Charcoal production
+6 photo
Charcoal-burning machine/Charcoal production
Price
135,000/equipment set EXW
Charcoal-burning machine Charcoal combustion complex is designed for processing of wood waste: dust, sawdust, chips - into high quality charcoal. In the future, the charcoal can be used for the production of charcoal briquettes, for roasting meat and barbecues, for the production of activated...
22 May
Show more
Works by Flagma since 12 March 2018
Стил Александр
менеджер
See more ads in the category Auto service equipment, other
Contact information
Стил Александр
менеджер
By phone
In messenger
Say, that you found an ad on Flagma
Safety rules: Do not agree to prepayment if you are not sure about the reliability of the user.
Write a message
Select category
×